TUDOR Submariner 79090 Blue 1990s

Item Number: TUDOR009

¥37,199.19 CNY

1989年に発売されたチューダー(チュードル)のサブマリーナ 79090のブルーです。

秒針はロリポップハンド、時針はメルセデスハンド(ベンツ針)の組み合わせ。

Brand: TUDOR
Model: Prince Oysterdate Submariner Blue
Ref: 79090
Serial: B41xxxx
Year: 1992
Movement: Automatic Cal.2824-2 (ETA 2824-2)
Case: 39mm
Material: SS
Bracelet Length: 17cm (11 Links)
Includes: 9315 Bracelet with 380B End Link (Clasp code P3)

【Description】

1989年に発売されたチューダー(チュードル)のサブマリーナ 79090のブルーです。

秒針はロリポップハンド、時針はメルセデスハンド(ベンツ針)の組み合わせ。

現在は使われていないトリチウムの夜光塗料、「フチ無し」と呼ばれる周りにメタルの枠が無いタイプのインデックスはヴィンテージダイバーならではのデザイン。

当時のサブマリーナにはこちらの39mmサイズの79090、ボーイズサイズ 36mmの75090、ミニサブと呼ばれる33mmの73090の3モデルが存在しました。

それぞれにブラック、ブルーの2種類がありブルーのモデルは「青サブ」という愛称で呼ばれています。

ブルーのサブマリーナはロレックスの場合、ステンレスとゴールドのコンビ(ロレックスでは「ロレゾール」と呼ばれます)、もしくは18Kゴールドケースのみのラインナップとなっています。

ステンレスケースのブルーはチューダー(チュードル)にしか無い点と「フチ無し」のヴィンテージ感のあるデザインということで、特に人気になっているという背景があります。

ダイアル12時位置にはチューダー(チュードル)の現在の象徴でもある盾マークが、3連の巻きブレスにも同じように盾マークが入っています。一方で裏蓋とリューズにはロレックスの王冠マークが入っています。

巻きブレスレットはオイスターブレスと比べると非常に軽く、現行モデルほどのずっしりした感じは無いと思います。

90年代以降、チューダー(チュードル)はサブマリーナの終焉とともにロレックスの部品を使用せず専用部品に切り替えました。

ロレックスの要素が入った最後のチューダー(チュードル)のサブマリーナの1つと言えるモデルです。

【Warranty】

2019年10月にオーバホール済み。1年保証となります。

オーバーホール時にゼンマイ、パッキン、風防交換済み。新品仕上げ済みです。

OHと新品仕上げは提携のAiry’sさんにて行っております。

※ Airy’sさんを取材した記事はこちらからご覧下さい。

(オーバホール内容)
分解、点検、部品洗浄・交換、組み立て、注油、精度調整、最終検査


【Description】

Overall excellent condition.
The dial, hands are original condition. (Never refinished)

【Warranty】

The watch has been serviced by our professional watchmaker in October 2019.
Crystal, gaskets, and mainspring are replaced in the last service.
Case and bracelet are polished.
Comes with 1-year warranty.

チュードル サブマリーナー Ref.79090  ブルーダイアル

1989年に発売されたチューダー(チュードル)のサブマリーナ 79090のブルーです。

秒針はロリポップハンド、時針はメルセデスハンド(ベンツ針)の組み合わせ。

[Payment Method]
1. Credit Card (Visa/Master/Amex)
2 Wire/Bank Transfer
*We have U.S bank account and European bank account. So you don't need to transfer internationaly.

[Delivery]
Shipped via FedEx International Priority.
Normally,Item will be shipped in 1-2 working days after payment received.

Tracking number will be provided, and insurance will cover if the item is damaged or missing in the shipping process.

[Custom Duty]
International buyer has a responsibility to pay import duties, taxes or charges. (ex VAT/GST)

We do not accept to declare lower value on shipping label or invoice.We will declare full value of them.

If you would like to know how much it will be, please check approximate cost below.
Import Duty Calculator - SimplyDuty

These costs normally collected by courier when you pick up item or after your receive.

[Return]
We accept return in the case of shipping mistake or item defect in 14 days after your receive.

  1. Can I check the actual item at the store?
    -Yes, You can check it at the store.

  2. Can I ask reserve the watch?
    -No, we do not reserve a watch until payment completed because we also sell our products on online store.

  3. Can you adjust my bracelet? 
    -Yes,If you indicate your approximate arm circumference when you place an order, we will adjust it and send it to you.
    (*Riveted bracelets and Folded bracelets need to be adjusted by our watchmaker, so please allow a little time for this.)

  4. How long does it take for "delivery after service"?
    -Please allow approximately 1month to 1.5 months from the time of order.
    (*It may take a little longer depending on the schedule of the wacthmaker and the number of customers.)

  5. Is there a payment deadline? (Bank transfer)
    -If we cannot confirm your payment within 2 days of your order, we will cancel your order.

  6. Can I order by cash on delivery?
    -No, we do not accept cash on delivery.
  7. Do you accept installment payments or BNPL(Buy Now Pay Later)?
    -No, We do not support installment payments or BNPL.
  8. Do you ship internationally?
    -Yes, we ship via FedEx International Priority.
    (*Customs duties and import taxes are the responsibility of the customer, so please pay them upon or before receiving the package.)
About Service
Service(Overhaul) is the process of disassembling a mechanical product down to its component parts, cleaning, and reassembling it to bring it back to the state of performance when it was new.

The overhaul procedure is roughly explained as follows
Separate the case and movement.
Disassemble the movement
Inspect each part for wear and tear and perform a preliminary cleaning.
Cleaning by a special machine
Lubrication and assembly
6. Water-resistance inspection (water-resistance function guaranteed)
7. Adjustment and running test
This is the process of the watchmaking process.

Some movements consist of several hundred parts, which are disassembled piece by piece, inspected, cleaned, and reassembled in an extremely precise process.

Without overhaul, just like a car, the oil deteriorates and the risk of wear and tear on the parts increases, causing a loss of precision or, in serious cases, the inability to run.

We recommend an overhaul every two to three years to ensure economical and long-lasting use of your watch.


About new finishing (polishing)

Vintage watches have been used for decades, and even the stainless steel used in many watches has become rounded at the corners, or has many small scratches on the surface that should be beautiful with a mirror finish.

At Albitro, we believe that our watches should be purchased in beautiful condition and used for a long time, so we sell them with a new finish.

Especially for dress watches with gold cases, we finish them to bring out the best of the precious metal case.

The watches sold at Albitro that have been newly finished are photographed in very high resolution, so you can see the edges are sharp and the mirror finish reflects the light.

Some cases and bracelets have a mixture of mirror and hairline finishes, but not many craftsmen are able to distinguish between them and finish them at a high level.

The "thinning of the case" is another area that is highly dependent on the skill of the craftsman. A watch with skinny lugs is far from its original design, and its appearance is unbalanced.

It is a very meticulous process to reduce the thinness of the case as much as possible while eliminating scratches and dents to bring the watch closer to its original finish.

Of course, in some cases, it is better to leave the watch in its original condition as it is, as it is the history of the watch and the original condition is important.

We look at each watch individually and decide whether it is best to finish it before selling it.

You may also like

Recently viewed