Patek Philippe Golden Ellipse 3648 WG Silver Sigma Dial

Item Number: PATEK005

¥51,619.33 CNY

Patek Philippe
Golden Ellipse
Early 1970s
Manual Wind Cal.23-300
18K White Gold
Lug width
Patek Phillipe Green Strap
Patek Phillipe Signed WG Buckle
The watch has been completely serviced by our watchmaker recently
Warranty1-year Mechanical Warranty
Global shipping via FedEx International Priority

*Due to Washington Convention, we cannot export Crocodile leather overseas.
So if you purchase from overseas, the strap will be replaced with a similar strap made of calf leather as an alternative(aftermarket one).


Patek Philippe is a watch manufacturer founded in Geneva in 1839.
We make uncompromising watches by making the most of our overwhelming quality and technical capabilities.

Together with Vacheron Constantin and Audemars Piguet, it is known as one of the world's three major brands, or the Big 3, and it is no exaggeration to say that it has established a special position among them.


In addition to continuing to be the world's top manufacturer, the number of watches produced is extremely small, so it can be said that this brand is synonymous with luxury watches.

The independence of family business and the reliability that all watches can be repaired create value as assets that can be passed down from generation to generation.

This watch is part of the Golden Ellipse collection.

Ellipse, which is a fusion of a circle and a rectangle. It is

The 'golden ratio', also known as the 'sacred ratio', can be found to this day in some of the greatest works of architecture and painting.

The Golden Ellipse, which was first announced in 1968, had a big impact with its design, which was completely different from the round and rectangular cases that had come before.

The case material is 18K white gold. The width is 27 mm and the height is 32 mm, but because it is oval, it does not look as big as the numbers, giving the impression of a small size.

The dial is a silver dial with a sunray finish. Speaking of Golden Ellipse, I think that the image of a yellow gold case with a blue dial is strong.

Among them, the combination of the silver system is quite rare. It is a condition that you can feel the aging in good condition.

The needle is a pencil hand, and the index is a bar hand. You can see aging like the dial.

Also, there is a σ (sigma) mark on both sides of SWISS at 6 o'clock on the dial.

This is a notation that can be seen on watches from around 1973 to around 2000 made by a manufacturer that belonged to the group APRIOR. Indicates that the

Introduced for the purpose of "indicating that this is a high-quality watch made in Switzerland in gold."

Rolex, Patek Philippe, Vacheron Constantin, IWC, and Omega. not.

Therefore, it is highly regarded among collectors as a rarity.

The equipped movement is a hand-wound Cal.23-300.

Cal.10-200 is the thinnest caliber that has adopted the gyromax balance, making it the thinnest Patek model 10 (23mm in diameter).

It has a reputation for its high degree of perfection, and the fact that it has been used for about 22 years since its first appearance in 1956 proves it.

The strap has been replaced with a new one at Patek Philippe.
A genuine WG buckle is also included.

Overhauled by Airy's. The case has been polished.

1 year warranty.

[Payment Method]
1. Credit Card (Visa/Master/Amex)
2 Wire/Bank Transfer
*We have U.S bank account and European bank account. So you don't need to transfer internationaly.

Shipped via FedEx International Priority.
Normally,Item will be shipped in 1-2 working days after payment received.

Tracking number will be provided, and insurance will cover if the item is damaged or missing in the shipping process.

[Custom Duty]
International buyer has a responsibility to pay import duties, taxes or charges. (ex VAT/GST)

We do not accept to declare lower value on shipping label or invoice.We will declare full value of them.

If you would like to know how much it will be, please check approximate cost below.
Import Duty Calculator - SimplyDuty

These costs normally collected by courier when you pick up item or after your receive.

We accept return in the case of shipping mistake or item defect in 14 days after your receive.

  1. Can I check the actual item at the store?
    -Yes, You can check it at the store.

  2. Can I ask reserve the watch?
    -No, we do not reserve a watch until payment completed because we also sell our products on online store.

  3. Can you adjust my bracelet? 
    -Yes,If you indicate your approximate arm circumference when you place an order, we will adjust it and send it to you.
    (*Riveted bracelets and Folded bracelets need to be adjusted by our watchmaker, so please allow a little time for this.)

  4. How long does it take for "delivery after service"?
    -Please allow approximately 1month to 1.5 months from the time of order.
    (*It may take a little longer depending on the schedule of the wacthmaker and the number of customers.)

  5. Is there a payment deadline? (Bank transfer)
    -If we cannot confirm your payment within 2 days of your order, we will cancel your order.

  6. Can I order by cash on delivery?
    -No, we do not accept cash on delivery.
  7. Do you accept installment payments or BNPL(Buy Now Pay Later)?
    -No, We do not support installment payments or BNPL.
  8. Do you ship internationally?
    -Yes, we ship via FedEx International Priority.
    (*Customs duties and import taxes are the responsibility of the customer, so please pay them upon or before receiving the package.)
About Service
Service(Overhaul) is the process of disassembling a mechanical product down to its component parts, cleaning, and reassembling it to bring it back to the state of performance when it was new.

The overhaul procedure is roughly explained as follows
Separate the case and movement.
Disassemble the movement
Inspect each part for wear and tear and perform a preliminary cleaning.
Cleaning by a special machine
Lubrication and assembly
6. Water-resistance inspection (water-resistance function guaranteed)
7. Adjustment and running test
This is the process of the watchmaking process.

Some movements consist of several hundred parts, which are disassembled piece by piece, inspected, cleaned, and reassembled in an extremely precise process.

Without overhaul, just like a car, the oil deteriorates and the risk of wear and tear on the parts increases, causing a loss of precision or, in serious cases, the inability to run.

We recommend an overhaul every two to three years to ensure economical and long-lasting use of your watch.

About new finishing (polishing)

Vintage watches have been used for decades, and even the stainless steel used in many watches has become rounded at the corners, or has many small scratches on the surface that should be beautiful with a mirror finish.

At Albitro, we believe that our watches should be purchased in beautiful condition and used for a long time, so we sell them with a new finish.

Especially for dress watches with gold cases, we finish them to bring out the best of the precious metal case.

The watches sold at Albitro that have been newly finished are photographed in very high resolution, so you can see the edges are sharp and the mirror finish reflects the light.

Some cases and bracelets have a mixture of mirror and hairline finishes, but not many craftsmen are able to distinguish between them and finish them at a high level.

The "thinning of the case" is another area that is highly dependent on the skill of the craftsman. A watch with skinny lugs is far from its original design, and its appearance is unbalanced.

It is a very meticulous process to reduce the thinness of the case as much as possible while eliminating scratches and dents to bring the watch closer to its original finish.

Of course, in some cases, it is better to leave the watch in its original condition as it is, as it is the history of the watch and the original condition is important.

We look at each watch individually and decide whether it is best to finish it before selling it.

You may also like

Recently viewed